HS-iRouter-F

The bRouter serves to bridge an MS/TP network to a much wider Ethernet network. It utilizes the availability and scalability of Ethernet connectivity. Since most buildings (commercial, industrial or residential) are internet-ready nowadays, control networks employing BACnet protocol can be controlled and monitored locally or remotely via the internet/intranet infrastructure. Any BACnet-enabled device can be connected to the MS/TP network as long as the number of nodes or the maximum length of the communications cable is not exceeded.

HS-iRouter-Q

HS/Q-iROUTER is a TCP/IP-based router on the high-speed and 2 RS485 downstream. Each RS485 network can be connected to max. 31 number of QA (Q-Bus) controllers when combined can support from 45 to 62 nodes depending on the selected model. The HS/Q-iROUTER can give a broader bandwidth than RS485 and can support 10/100 MBPS Ethernet speed. It uses TCP/IP ModBus protocol on the high-speed which can be linked up to iNEXUS SCADA as the supervisory software or any HMI/SCADA that supports the ModBus TCP/IP.

IN-iRouter

IN-iROUTER is a TCP/IP-based router on the high-speed and 2 RS485 downstream. Each RS485 network can be connected to max. 31 number of QA (Q-Bus) controllers when combined can support from 45 to 62 nodes depending on the selected model. The IN-iROUTER can give a broader bandwidth than RS485 and can support 10/100 MBPS Ethernet speed. It uses TCP/IP ModBus protocol on the high-speed which can be linked up to iNEXUS SCADA as the supervisory software or any HMI/SCADA that supports the ModBus TCP/IP.

HS-iRouter-P

HS/Q-iROUTER is a TCP/IP-based router on the high-speed and 2 RS485 downstream. Each RS485 network can be connected to max. 31 number of QA (QBus) controllers when combined can support from 45 to 62 nodes depending on the selected model. The PR/PRO4 can give a broader bandwidth than RS-485 and can support 10/100 MBPS Ethernet speed. It uses TCP/IP ModBus protocol on the high-speed which can be linked up to iNEXUS SCADA as the supervisory software or any HMI/SCADA that supports the ModBus TCP/IP.

LP-485

The LP-485 is a protection board designed specifically to cater for all models of ICON Q-Bus series device network. This will serve as the first layer of protection before any astray signal penetrates the DDC RS-485 communication transceiver.

UI4PP

The UI4PP is a protection board designed specifically to cater for all models of ICON series universal inputs or any brand of DDC controllers. This will serve as the first layer of protection before any astray signal penetrates the DDC UI points.